Metal Finishing

The Metal Finishing:

Metal finishing refers to a broad range of industrial processes that alter the metallic surface of a manufactured item to achieve a certain characteristic, such as improved chemical resistance or electrical conductivity. These processes are highly common in the automotive, electronics, telecommunications, heavy machinery and aerospace industries.

Metal finishing is essential to extend the lifespan of many products, which would otherwise be damaged by corrosion, leading to a high turnover of many industrial and household equipment. This would negatively impact the economy and the environment.

Quickpetro® M (-10°C-320°C)
Quickpetro®MXT (-7°C-320°C)
Why use a thermal fluid in metal finishing applications?
What should I look for in a thermal fluid for metal finishing aplications?
How do I maintain my thermal fluid for metal finishing?
Are there any important regulations to be aware of ?
Quickpetro® M (-10°C-320°C)

Application

A superior high performance energy efficient heat transfer fluid suitable for use in all kinds of industrial processes.

About Quickpetro® M

Made from highly refined base stocks, Quickpetro^® M thermal fluid has excellent thermal and oxidation stability allowing operation at high temperatures for extended periods. The fluid also has efficient thermal conductivity and low viscosity, at the relevant operating temperatures, ensure high heat transfer rates requiring limited pumping energy. Quickpetro^® M heat transfer fluid provides:

low vapour pressures at elevated temperatures
greatly reduced evaporation
vapour lock and cavitation eliminating the need for high pressure piping and equipment

Used fluid may be disposed of through a number of environmentally acceptable methods such as used oil recycling or heavy fuels burning.

Product	208 Litre barrel	Bulk	25 Litre	1050 Litre IBC
Quickpetro® M (-10°C – 320°C)

Contact us for more information on high temperature thermal oils We provide advice on how to choose the most appropriate oil for your heat transfer applications and provide our customers with continued technical support. Call us on +91 98256 12722 for more information

Quickpetro®MXT (-7°C-320°C)

Using Quickpetro® MXT

Quickpetro^® MXT Heat transfer oil contains a highly resilient blend of additives resistant to sludging and ensures long-lasting and trouble-free service when managed correctly
This heat transfer oil is a mineral based liquid phase heat transfer oil used for operating at bulk temperatures between -7°C and 320°C in both open and closed circulation.
Quickpetro® MXT heat transfer oil is resistant to the oxidation and thermal cracking found in many industrial processing environments, including; chemical, pharmaceutical, plastics, paper, wood and textiles.
Quickpetro® MXT Heat transfer oil is non-toxic and non-corrosive.
This Heat transfer oil is suitable for a range of indirect open and closed liquid phase industrial heat transfer systems.
Used oil may be disposed of through a number of environmentally acceptable methods such as used oil recycling or heavy fuels burning.

Talk to us about our all-inclusive reprocessing services.

Product

Quickpetro® MXT (-7°C – 320°C)

Why use a thermal fluid in metal finishing applications?

Thermal fluids are essential to reach and keep the desired temperatures in many manufacturing methods of metal finishing, such as metal plating, one of the most common. In metal plating, the surface of the material is covered with a thin coating of metal, such as copper or nickel. To effectively coat the material, the metal bath must be at a precise temperature, which varies widely depending on the metal and the type of material being coated. The right heat transfer fluid can ensure that the correct temperature is reached and then maintained for the duration of the process. Other metal finishing processes include heat treatment, metal anodizing and galvanizing. All of these techniques require the use of large process equipment, that normally need heat transfer fluids for heating and cooling.

What should I look for in a thermal fluid for metal finishing aplications?

Metal finishing applications require high temperatures for extended periods of time. As a consequence, it’s important to select a thermal fluid with good thermal stability. All thermal oils tend to degrade over time, since at high temperatures, the bonds between hydrocarbon chains start to break and produce carbon in a process called fouling. As the concentration of carbon increases, it can deposit sludge into the pipes and reduce the efficiency of the entire system. A thermal fluid with a high thermal stability can resist high temperatures and occasional temperature peaks. This can slow down degradation and prevent the formation of sludge. It’s also important to choose a heat transfer fluid with a high flash point, the temperature at which a fluid produces enough vapour to be ignited. Over time, the molecules in a thermal oil will break down in a process called thermal cracking, creating volatile light ends. These cause the flash point to drop, increasing the risk of fire. Thermal oil condition monitoring is essential to maintain a safe site and ensure system availability.

How do I maintain my thermal fluid for metal finishing?

Quickpetro can help you determine which thermal oil is best for you and will support you in monitoring the efficiency of your heat transfer process via regular sampling and engineer visits. Like all industries, businesses in the metal finishing sector are tying to be more environmentally friendly to reduce their impact on the planet and avoid ever-increasing environmental fines. To reach this goal, it is paramount to be as thermally efficient as possible. Subscribing to a proactive maintenance plan such as Quickpetro Thermocare is important to guarantee that your heat transfer system is running efficiently. This includes regular system analysis, fluid top-ups and flashpoint and fouling management.

Are there any important regulations to be aware of ?

The DSEAR and ATEX regulations protect workers against risks from fire, explosion and similar events arising from dangerous substances present in the workplace, including thermal fluids. These regulations apply to all industries that use heat transfer systems, and employers in the metal finishing sector must be aware of them. At Quickpetro, our expert team will be able to advise you on how to comply with relevant laws in relation to thermal fluid management.

Have you got more questions about thermal fluid for metal finishing applications?

Call us on +91 98256 12722 for more information Want to review our case studies in Metal Finishing applications?

Applications

Related Applications

Quick petro

The Metal Finishing:

Related Applications

Metal Finishing

Wood Processing

Plastics, Polymer and Styrene